How to replace Orange LIVEBOX by UDM PRO SE ?

What do you need ?

• 1 UDM PRO SE
• 1 LEOX GPON STICK LXT-010S-H
• 1 SC-APC / SC-UPC Cable

STEP 1 : Create configuration network

On the UDM PRO SE :

• Create a new network named : CONF LEOX
• Uncheck Auto-Scale Network
• Set Host Address to : 192.168.100.2
• Set Netmask to 29 to allow 5 IPs
• Set DHCP Mode to : DHCP Server
• Set DHCP Rans to :
• Start : 192.168.100.2
• Stop : 192.168.100.6

STEP 2 : Connect the GPON Adapter for configuration

On the UDM PRO SE :

• Set Port Profile of GPON to network freshly created : CONF LEOX
• Apply changes

STEP 3 : Allow your computer to access GPON configuration

In order to be able to communicate with GPON, you need to be on the same subnet as GPON

On the UDM PRO SE :

• Set Port Profile of your computer to CONF LEOX port
• Apply changes

STEP 4 : Upgrade GPON to latest version

• Go to http://192.168.100.1/upgrade.asp

• Fill the basic authentication with these values :

• Username : leox

• Password : leolabs_7

• Download the firmware

• Select the firmware on your laptop
• Click on Upgrade button
• Confirm you want to upgrade

STEP 5 : Verify that version is latest one

Once you upgrade to latest version, you should verify that

• Go to http://192.168.100.1/status.asp
• Firmware version should be : V3.3.4L4rc5

STEP 6 : Connect to GPON via telnet

On the UDM PRO SE

• Install telnet package

apt update
apt install telnet

• Initiate a telnet connection to GPON

telnet 192.168.100.1
Trying 192.168.100.1...
Connected to 192.168.100.1.
Escape character is '^]'.
LXT-010S-H login: leox
Password: leolabs_7
#

You are now connected into the GPON

STEP 7 : Get informations from Livebox

I've made a little application written in GO to fetch directly informations from Livebox

• Download the app : GOBOX
• Execute it
• Fill IP, Username and Password

You should have something like that :

> ./gobox
Livebox IP : 192.168.1.1
Username : admin
Password :
✅ Successfully connected to Livebox ! ✅

===========LEOX GPON COMMAND=============
flash set GPON_PLOAM_PASSWD DEFAULT012
flash set OMCI_TM_OPT 0
flash set OMCI_OLT_MODE 1
flash set GPON_SN XXXXXXXXXXXX
flash set PON_VENDOR_ID SMBS
flash set HW_HWVER XXXXXXXXXXXX
flash set OMCI_SW_VER1 XXXXXXXXXXXXX
flash set OMCI_SW_VER2 XXXXXXXXXXXXX
=========================================

==========UDM PRO SE SETTINGS============
NAME              : LEOX GPON
VLAN ID           : 832
MAC Address Clone : XX:XX:XX:XX:XX:XX
DHCP OPTION 60    : sagem
DHCP OPTION 77    : FSVDSL_livebox.Internet.softathome.Livebox5
DHCP OPTION 90    : 00:00:00:00:00:00:00:00:00:00:00:1a:09:00:00:05:58:01:03:41:01:0D:66:74:69:2F:67:66:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX
DHCP CoS          : 6
=========================================

STEP 8 : Configure the GPON

• Go back to GPON configuration
• Copy / Paste all LEOX GPON COMMAND fetched on STEP 7
• Verify GPON state

> diag gpon get onu-state
# IT SHOULD RETURN 05
gpon get onu-state
ONU state: Operation State(O5)

Now it's time to find the OltVendorId

> omcicli mib get 131
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
OltG
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityId: 0x00
OltVendorId: ALCL
EquipId:
Version:
ToDInfo:
 Sequence number of GEM superframe: 0x0
 Timestamp: secs 0, nanosecs 0
=================================

You should have something in OltVendorId, if you have nothing please check previous steps.

Ok so now my OltVendorId is ALCL which is Alcatel

Tell the GPON that OMCC_VER is 128

flash set OMCC_VER 128

STEP 9 : Configure the UDM PRO SE

• Go to UDM PRO SE -> Network -> Settings -> Internet
• Select second internet source

Apply your changes

You should optain something like this :

STEP 10 : Test in production

• Move the GPON from port 11 to port 10
• Wait a bit
• You should see an IP address on Network -> Settings -> Internet :